Stone Compound Crusher

Introduction of Stone Compound Crusher

The stone compound crusher is composed of a transmission device, main shaft, cylinder, upper cover, and base. The motor drives the main shaft which equipped with a hammerhead to rotate through the trapezoidal triangle belt. The material enters the compound crusher machine from the upper feeding port and falls by gravity. Then the material is continuously crushed by a series of high-speed rotating hammerhead and then discharged from the lower discharge port.

Maintenance of Stone Compound Crusher

1. The stone compound crusher equipment has a large crushing ratio and the crushing ratio of vertical composite crusher is large, and the adjusted arbitrarily discharge particle size without affected by the abrasion of the hammer and liner.

2. There is no screen bar setting, so it is not easy to block when crushing materials with high moisture content and large mud content.

3. With elastic adjustment mechanism, the unbreakable material can be discharged automatically without causing compound crusher damage.

4. The bearing is arranged horizontally with long service life and can crush materials with high temperature (such as cement clinker). The rotor body of this high quality compound crusher has a unique structure, and the rotor body is hardly worn when crushing materials.

5. The rear cavity is equipped with a screw rod or hydraulic opening mechanism, which can easily replace the vulnerable parts without starting the main equipment.