Factory Direct Wet Pan Mill

Working Principle of Factory Direct Wet Pan Mill

Factory direct wet pan mill repeatedly squeezes and grind gold ore through the weight of the wheels until the gold ore has been ground completely. And then add mercury into the water. Meantime, add gold ore to the factory direct wet pan mill machine every 5-10 minutes. After 24 hours, recycle mercury. Then pack mercury with a big density of cloth and twist the cloth so that the mercury comes out and gold be left in the cloth.

Operation and Maintenace of Factory Direct Wet Pan Mill

1.The material should be put into the factory direct wet pan mill uniformity and better to use feeding equipment.

2.Every bolt of the factory direct wet pan mill should be checked to avoid flexibility.

3.The bearing should be changed in time to avoid damage to other parts of the factory direct wet pan mill.

4.While the factory direct wet pan mill is running formally, users should check if there is abnormal sound in the reducer box or bearing part, if there is a too high temperature if there is too big motor current, and so on. If it happened, the wet pan mill should be stopped to remedy the trouble.

5.The motor V-belt should be removed while examine and repair the factory direct wet pan mill.