Alluvial Gold Shaking Table

Technical Parameters

Structure Classification of Alluvial Gold Shaking Table

According to the design structure, the alluvial gold shaking table can be divided into fixed beneficiation shaker, small channel steel beneficiation shaker, and large channel steel beneficiation shaker. The surface of the shaker is divided into the straight groove and hyperbolic wave groove.

Working Process of Alluvial Gold Shaking Table

Alluvial gold shaking table is mainly composed of bed surface, frame, and transmission mechanism. The bed surface is approximately trapezoidal or rhombic in shape, with an inclination of 1 ° to 5 ° on the transverse plane, and the mining trough and water supply trough are arranged above the tilt.The height of the bed strip gradually decreases from the driving end to the opposite side and pinches out along one or two oblique lines. The whole bed surface is supported by a frame, and a slope adjustment device is installed on the frame. A transmission device is arranged at one end of the longitudinal bed near the feeding trough, which drives the bed surface to make a reciprocating asymmetric motion. This kind of motion makes the bed surface have the characteristics of rapid return motion when it is approaching the end, which is called differential motion.