Flotation Machine For Mineral

Introduction of Flotation Machine for Mineral

Flotation machine for mineralsis a mineral processing method based on the different wettability of minerals by water. Generally, the floatability of minerals is called the floatability of minerals. Flotation is to use the difference of floatability of minerals to separate minerals. In the modern flotation process, the application of flotation reagents is particularly important, because the floatability of minerals can be changed after being treated by flotation reagents so that the minerals to be floated can selectively adhere to bubbles, so as to achieve the purpose of mineral processing.

Working Principle of Flotation Machine for Mineral

Flotation machine for the mineral is driven by the triangle belt of the motor to rotate the impeller, which produces a centrifugal effect to form a negative pressure. On the one hand, sufficient air is mixed with the slurry. On the one hand, the slurry is mixed with the medicine, and the foam is refined at the same time so that the mineral adheres to the foam and floats to the slurry surface to form a mineralized foam. Adjust the height of the gate and control the liquid level, so that the useful foam is scraped out by the scraper.

Characteristics of Flotation Machine for Mineral

Flotation machine for mineral produced by the Nile Machinery has the following characteristics: large suction capacity and low power consumption. Each cell has triple functions of suction, pulp suction and flotation with its own flotation circuit, without any auxiliary equipment. The horizontal configuration is convenient for process change. The slurry circulation is reasonable, which can greatly reduce the coarse sand precipitation. With automatic control device of pulp surface, it's easy to adjust. The impeller is equipped with backward inclined upper and lower blades. The upper blade produces pulp up circulation and the lower blade produces pulp down circulation.