Stone Raymond Roller Mill

Application of Stone Raymond Roller Mill

Stone Raymond roller mill is widely applied in the nonflammable and explosive mineral, chemical, construction, and other industries for processing the materials with Mohs hardness no more than 7 and humidity below 6%, such as barite, calcite, potassium feldspar, talc, marble, limestone, dolomite, fluorite, lime, activated clay, activated carbon, bentonite, kaolin, cement, phosphate rock, gypsum, glass, thermal insulation materials, etc. The finished product size of the stone Raymond roller mill can be adjusted arbitrarily within the range of 80-325 mesh, and some materials can be up to 600 mesh.

Precautionsof Stone Raymond Roller Mill

1.In order to ensure the normal operation of the stone Raymond roller mill, the "safe operation system of equipment maintenance" should be formulated to ensure the long-term safe operation of the Raymond mill. At the same time, necessary maintenance tools, grease, and corresponding accessories should be provided.

2.When the grinding roller device of the stone Raymond roller mill has been used for more than 500 hours to replace the grinding roller, the rolling bearings in the roller sleeve must be cleaned, and the damaged parts should be replaced in time. The refueling tool can be a manual refueling pump and a grease gun.

3.When the stone Raymond roller mill is in use, there should be a fixed person responsible for the supervision, and the operator must have a certain technical level. Before the installation of the Raymond roller mill, necessary technical training must be carried out for operators to make them understand the principle and performance of the Raymond mill and be familiar with operating procedures.

4.Stone Raymond roller mill should be overhauled after being used for a period of time. At the same time, the wearing parts such as the grinding roller, grinding ring, and blade should be repaired and replaced. Before and after using the grinding roller device, the connecting bolts and nuts should be carefully checked to see whether there is a looseness and whether the lubricating grease is sufficient.