Cone crusher is a commonly used secondary crushing equipment, suitable for crushing materials with greater hardness, and is widely used in mining ores crushing, metallurgy, construction, cement and sand manufacturing, etc. Today, I will introduce how to maximize the production capacity of cone crushers.
1. Classification and working principle of cone crusher
With the development of mining technology, cone crushers have many types, such as spring cone crusher, single cylinder hydraulic cone crusher, multi-cylinder hydraulic cone crusher, Symons cone crusher, and other types.
The working principle of cone stone crusher
In the working process of the cone crusher machine, the motor drives the eccentric sleeve to rotate through the transmission device. The moving cone rotates and swings under the forced movement of the eccentric shaft sleeve. The static cone is broken by multiple squeezing and impacts. When the moving cone leaves this section, the material that has been crushed to the required particle size there falls under its own gravity and is discharged from the bottom of the cone.
2. How to maximize the production capacity of the cone stone crushing machinery?
1. Feed evenly
Transport the stones evenly into the crushing cavity of the cone rock crusher to avoid feeding too much or too little. If the feed of the cone crusher equipment is in an unstable state, it will affect the product size, work efficiency, and the service life of the machine.
2. The feeding height should not be too high
If the feed height is too large, the stone will easily "rush" into the crushing cavity at high speed, which will cause excessive pressure or tension on the crushed parts, resulting in additional maintenance costs and low output.
3. The drop point of the feed is aligned with the center point of the feed inlet
The vertical baffle is used to guide the material drop point at the center of the cone crusher inlet. Once the drop point is eccentric, one side of the crushing cavity is full of material and the other side has no or little material, which will cause lower crusher throughput, increased needle-like products, and large product particle size.
4. Keep the parameters of the tight side discharge opening unchanged
To stabilize the output, quality, and production line load of sand and gravel products, the first thing to ensure is that the parameters of the conical crusher's tight-side discharge outlet are unchanged, otherwise, it will easily cause the product size to increase unexpectedly, which will affect the entire production line system and final output.
5. Minimize the detention of the buffer silo and improve the efficiency of the production line
Reasonable use of buffer silos and variable-speed feeding devices enable operators to maintain the "full cavity" state of the cone crusher for a long time and increase the processing capacity of the cone crusher.
In addition, we must pay attention to the daily maintenance and maintenance of the cone crusher to ensure that the parts are in normal working condition, so as to better improve the production capacity of the cone crusher for sale. If you want to know more about mining machinery, welcome to consult our customer service online.
