Wet pan grinding mill is a commonly used gold selection equipment, which not only has high work efficiency but also a good recovery effect. The equipment is deeply liked by African customers. High-quality equipment must pay more attention to daily maintenance and maintenance to maximize the effect of the wet mill and extend the service life of the wet pan mill machine. Today, I will give you a detailed introduction to the test run and daily maintenance methods of the wet pan gold mill.
1. After the installation of the double wheels grinding mill is completed, clean up the internal and external debris and tools; check in detail whether each connection part is loose and whether there is any leakage in the sealing part. After confirming that it is correct, the test can be carried out.
2. No-load test run: start the motor and run the 2-roller wet pan mill with no load for about half an hour (you can add a small amount of water to the water basin to check if there is any leakage at the bottom of the water basin); after the test run, tighten all the connecting parts again. Check the oil circuit and transmission parts.
3. Load test run: the first turn on the 2 rollers grinding mill and water valve, and then gradually feed the material. The amount of ore fed is about half of the normal. Run for about 4-8 hours; after the test run, tighten all the connections and check the oil circuit, Transmission parts.
4. Full load test run: turn on all equipment and run at full load for 8 hours; after the test run, tighten all the connections and check the oil circuit and transmission parts.
1. Regularly inject clean lubricating oil into the upper bearing of the wet pan mill machine reducer, the roller core bearing, and the bearing oil filling point on the main shaft.
And add half of the clean gear oil in the gearbox.
2. The newly installed outer ring and inner core fastening bolts are prone to loosening and must be checked frequently.
4. Pay attention to check the degree of wear of easily worn parts, and pay attention to replacing worn parts at any time.
5. The plane of the bottom frame of the equipment should be free of dust and other materials to avoid affecting the operation of the motor and gearbox and causing serious accidents.
6. If the bearing has abnormal noise or the temperature of the bearing position increases, stop and check the cause to eliminate it immediately, and ensure that the bearing temperature does not exceed 80°C.
7. If there is an abnormal response when the rotating gear is running, stop and check immediately and eliminate it.
The above is the test run method and maintenance method of the wet pan gold mill. The wet pan grinder mills produced by the Nile are of good quality and excellent price. The equipment has been well received by customers and has been sold all over the world. If you want to know more about the wet pan mill for sale, please consult our customer service online, and we will arrange a business manager to introduce the product information for you in detail.
