The sand-making machine is an indispensable piece of equipment in the production line. It is widely used in the fine crushing and coarse grinding of various ores. It not only has a good particle size of the finished product but also has high work efficiency. A good machine needs to pay attention to daily maintenance and maintenance to make the machine have a longer service life and higher work efficiency. The following is an introduction to how to maintain the sand-making grinder machine.
1. The sand stone making machine should be started without load
Before starting the sand-making equipment, the debris in the crushing cavity needs to be removed to ensure a no-load start before adding ore materials. If there is material in the crushing cavity, it will cause excessive starting pressure of the motor and burn the motor, causing the machine to fail to work normally.
2. Follow the instructions
Operators should operate in accordance with the operating instructions. If they don’t understand, they should promptly ask the customer service and technical personnel of the relevant product. This can effectively avoid equipment damage and personal injury caused by improper operation.
3. Regularly check whether the various parts of the sand rock making machine are working properly.
The operator mainly inspects the internal wear of the stone sand making machine, the central feed pipe, the circumferential guard plate, the upper and lower flow liners of the impeller, and promptly replaces the severely worn parts. Secondly, the operator should remove dust and debris when placing the bottom frame of the movable device to prevent the movable bearing from moving on the bottom frame when the machine encounters unbreakable materials, causing accidents.
4. Add lubricating oil to the bearing regularly
Since the shaft bears the full load of the negative machine, adding lubricating oil to the bearing regularly can increase the service life and operating rate of the machine. When the machine has been working for 2000 hours, we need to clean the bearings of the sand-making machinery, and when it has been working for 7200 hours, we need to replace new bearings.
5. Pay attention to the nature and characteristics of the material within the specified range
VSI sand-making machines of different specifications require different feed sizes. When adding ore raw materials, pay attention to the hardness, humidity, and viscosity of the materials within the specified range to make the sand-making machine more efficient.
6. Regular shutdown and rest
Since the sand-making grinder machine works in the open air and the working environment is harsh if the sand-making machine is in a high-load working state for a long time, the degree of wear of the sand-making machine will be accelerated and the service life will be reduced. Therefore, paying attention to daily maintenance and shutdown and rest is also an important link to prolong the service life of the sand-making machine.
The above is the daily maintenance method of the sand-making machine. The Nile Machinery is a manufacturer focusing on research and mining machinery and equipment. It has a strong business team and a professional technical team. It adopts the most advanced technology and technology to provide customers with high-quality and cost-effective products.
