Symons stone cone crusher is not only a large processing capacity but also a good crushing particle shape, it is a very good crusher. During the use of the Symons cone crusher machine, the lubricating oil of each part should be checked regularly. If the lubricating oil is insufficient or mixed with impurities, it should be added or replaced according to the detailed requirements in the manual. But after our investigation, our customers often add lubricating oil according to their own wishes or do not know how to add it. Today, I will explain in detail how to add lubricating oil and what type of lubricating oil to add.
1. Why do you need to add lubricating oil to the machine?
Symons cone crusher equipment is prone to failure of machine parts under long-term work. The addition of lubricant can reduce the wear of the machine. The operator regularly adds lubricating oil to the machine parts not only to improve the working efficiency of the machine but also to extend the life of the machine.
2. How to add lubricating oil?
For the Symons stone cone crushing machine, due to the differences in the working methods and conditions of each part, there are strict requirements on the refueling cycle of each lubrication point, the amount of refueling each time, and the method of refueling. The user must refuel strictly according to the refueling cycle marked in the manual, and do not add it at will. If you don’t understand after reading the manual, you can ask the online customer service of The Nile instead of adding it blindly. For example, the motor bearings of the crusher and the oil pump motor of the thin oil station should be added by means of oil gun filling.
3. What kind of lubricating oil needs to be added to the machine?
The various parts of Symons rock cone crusher machine also have different requirements for lubricants, so users need to add different types and different brands of lubricants as required. The user must strictly follow the lubricant given in the instruction manual to add. The motor bearings of the crusher and the oil pump motor of the thin oil station should use molybdenum disulfide lubricating oil. The drive bearing of the crusher needs to be filled with mechanical lubricant.
4. What damage does add too much lubricating oil to the machine?
If too much lubricant is added to the Symons rock cone crusher, the power generated by the motor cannot be well transmitted to the crushing parts of the crusher. But this part of the force acts on the lubricant, causing the lubricant to heat up. This heat accumulates in the machine, which will cause damage to the machine. The user must add the amount of oil strictly in accordance with the requirements of the instruction manual. Excessive filling of lubricating oil is harmful and useless.
5. How often does it take to check and add lubricating oil?
Because the various components of the Symons cone ore crusher are used differently, the cycle of adding lubricating oil is also different. The motor bearings and motor of the crusher should be lubricated every 6 months. The drive bearings of the crusher and the shafts and grinding discs should be checked and added once a day.
The above is a detailed introduction of some small knowledge about lubricating oil for everyone, I hope it will be helpful to everyone. If you are interested in the Symons cone crusher for sale of the Nile, please consult our online customer service, we will arrange a professional salesperson to provide you with quotations and product information.
