Raymond grinding mill is a commonly used milling equipment in the powder industry. It not only has a good granularity of the finished product but also has a high degree of automation. It does not require too much manual operation, which saves time and effort. Due to the long-term use of the Raymond mill machine, some wearing parts will inevitably be damaged, but if the wearing parts are properly maintained, the service life of the wearing parts can be prolonged. Today, I will teach you how to maintain the wearing parts.
The wearing parts of Raymond grinder mill mainly include grinding rollers, grinding rings, shovel blades, etc. We need to pay attention to the daily maintenance of these wearing parts so that the service life of the machine is longer and the work efficiency is higher.
The grinding roller and grinding ring of Raymond Mill equipment are the broken parts of the whole equipment, but also the vulnerable parts. The material is conveyed by the feeder between the grinding roller and the grinding ring, and then subjected to the squeezing and rotating force of the grinding roller to the grinding ring, so as to achieve the effect of crushing the material. Therefore, the grinding roller and the grinding ring are not only subjected to the frictional force of the material, but also the frictional force between them. When the grinding roller and grinding ring are severely worn or unevenly worn, it will affect the quality of production and finished products.
Maintenance method: First of all, the grinding roller and grinding ring of the Raymond grinder Mill machine should be made of high-strength, high-toughness wear-resistant steel material to make it more widely applicable. Secondly, when the grinding roller is used for more than 500 hours, the grinding roller should be replaced again, and the rolling bearings in the roller sleeve should be cleaned. Finally, before and after the use of the roller grinding device, carefully check whether the bolts and nuts are loose and whether the lubricating oil is sufficient.
The blade of the Raymond powder grinding Mill is mainly responsible for picking up the material, adding it to the middle of the grinding roller and grinding ring, and smashing it. When the shovel blade continuously scoops up materials, it needs to carry out long-term contact and friction on materials of different quality and hardness, which is very susceptible to wear. When the blade is severely damaged, the material cannot be added to the grinding ring of the grinding roller for smashing, resulting in the reduction of the working efficiency of the Raymond mill equipment.
Maintenance method: First of all, the blade sharpened by Raymond mill should be made of steel with strong wear resistance, which is convenient for later use. Secondly, the operator needs to add a sufficient amount of lubricating oil to the blade regularly to reduce blade wear. Finally, always check the wear of the blade and discover hidden faults in time to avoid machine failures.
In summary, we must regularly check the wear of Raymond wear parts and replace them in time, and pay attention to the daily lubricating oil. The Raymond grinder mill produced by the Nile is of good quality and excellent price. If you want to know more product information, please consult our customer service online, and we will arrange a professional salesperson to contact you.
