In the hot summer, the crusher is extremely prone to failure during the working process, so what methods should we take to ensure the normal production of the crusher?
1. Do a good job in the daily maintenance of crusher equipment. Regularly check the equipment, replace the butter, adjust the belt, check the core components and wear parts, the operator should always check the values on the various thermometers, and immediately stop the machine for inspection and troubleshoot the problem.
2. Clean up the oil and dust on the motor body in time to ensure that the engine maintains good heat dissipation. In summer, the temperature is high, the air is dry, and the dust problem is more prominent, so we must pay attention to daily cleaning. For example, we need to check the fixing bolts of the dust-proof seal slip ring of the cone crusher regularly to prevent the dust seal and slip ring from falling off, so that a large amount of dust and ore enters the body, causing the crusher to be scrapped or major economic losses.
3. Replace the appropriate oil viscosity grade for the equipment. Generally, the oil viscosity grade in summer is appropriately higher than other times. Motor oil and lubricating oil in various places need to be replaced with summer oil. The amount of oil is appropriate. Check whether there is oil leakage frequently, and the fuel should be refilled in time.
4. Check whether the cooling system and fuel system are unblocked, and replace the aging wires, plugs, fuel pipes, screws, and tighten the fuel pipeline to prevent fuel leakage.
5. During the operation of the crusher, always pay attention to the temperature of the crusher's bearings. Under normal working conditions, the bearing temperature rise should be within 35 degrees and not exceed 70 degrees. Keep the bearing in a good lubrication state, and pay attention to whether there is abnormal sound and vibration.
6. The equipment should be placed in a cool place for work or storage as far as possible to avoid prolonged exposure to the sun, which will cause equipment aging, and affect work efficiency and material quality. There are many methods for sun protection, such as building temporary awnings and sun protection nets for equipment.
7. The indoor equipment is set in a place with good ventilation. At the same time, attention should be paid to adjusting the indoor temperature and the ventilation and air permeability of the surrounding environment. The temperature does not exceed 40 degrees to provide a good working environment for the crusher.
The above is the method for the normal production of the crusher under high-temperature conditions. We must pay attention to the environmental requirements of the crusher and improve work efficiency. If you have any questions, please feel free to consult.
