Compared with the traditional crusher, cone crusher is crushing equipment with higher technology content and more popular with users. In addition, it can crush and process many kinds of materials, and the work efficiency is very high, so it is the mainstream of contemporary crushing equipment. In order to make the service life of the cone crusher machine longer, users should pay attention to repair and maintenance in the process of use. So how to maintain the high-quality Symons cone crusher?
1. When the material to be crushed by the cone crusher equipment is wet or has large water content, the fixing bolts of the dust-proof seal slip ring should be checked frequently.
2. The fixed condition of the slip ring should be checked frequently to prevent a large amount of dust and mineral sand from entering the equipment body due to the falling off of the slip ring of the dust-proof sealing box during the operation, which will affect the operation of the aggregate cone crusher equipment and even lead to a serious failure of the equipment.
3. To produce at full capacity production, otherwise, the product size will be too coarse.
4. The lubricating oil should be changed frequently, otherwise, it will accelerate the wear of gears, bowl-shaped bushes, and shaft sleeve, and even cause shaft sleeve damage.
5. When adding hydraulic oil to the hydraulic system, it must be strictly filtered by a clean oil filter before adding it to the hydraulic cylinder. The amount of oil added shall be filled with system piping and machine components, and shall be kept within the range specified in the oil standard.
6. The water pressure in the cooler is higher than the oil pressure, the water leakage of the cooler, the water supply of the water seal is too large, or the water supply pipe is blocked, which can cause water to be mixed in the oil of stone cone crusher and make the oil level in the oil tank "forced to rise". In view of this situation, the user can adjust the water pressure slightly lower than the oil pressure, check and repair the leaking parts, adjust the water supply, clean the return water circuit and oil tank and replace it with new oil.
7. During the operation, check the quality of the hydraulic oil regularly and pay attention to the replacement time of the hydraulic oil, so as to prevent the splashing of water or the entry of dust and fiber debris, and keep the hydraulic oil clean at all times to keep the hydraulic system of cone crusher plant in good working condition.
The above is an introduction on how to maintain the rock cone crusher, and users can refer to ensure the normal operation of the crushing equipment. For more information about the cone stone crusher, such as prices, parameters, etc., please click on the online service.
