Spiral sand washer is widely used for the washing, grading, impurity removal, fine and coarse-grained materials washing in the highway, hydropower, construction, and other industries and has the characteristics of low power consumption, high cleaning degree, reasonable structure, and large processing capacity. In order to ensure these advantages of the spiral sand washing machine in production, it is necessary to pay attention to daily maintenance work.
1. Before starting the screw sand washer, rotate the rotor by hand to check whether there are any abnormalities in all parts of the machine.
2. The user should install protective equipment on the V-belt according to the specific situation of the site before equipment operation.
3. Do not repair and clean up the spiral sand washer machine when it is running, and it is strictly forbidden to start the machine for maintenance.
4. Do not add stones that exceed the specified size.
5. The screw washer should rotate in a fixed direction, not in the reverse direction.
6. In case of abnormal vibration or noise during the operation of the spiral sand classifier, stop feeding immediately. After the materials in the box are exhausted, stop the machine for inspection, and then continue to operate after troubleshooting. In case of a tight situation, stop the motor first, clear the materials in the cavity before starting, and start the machine without load.
7. The working site of the high efficient spiral wash sand machine should not be piled up with debris, and there must be sufficient lighting equipment.
The daily maintenance details of spiral type sand washing machines are very important, users must remember and use them flexibly. In this way, the occurrence of mechanical failure can be avoided, and the service life of spiral sand washing equipment can be effectively extended.
