Impact Crusher and Hammer Crusher both use impact principle to crush materials, and the finished material has excellent particle shape. From the appearance, impact crusher and hammer crusher are similar, but they are different in many aspects, so which is better?
There are six differences of impact crusher and hammer crusher from the structure, working principle and applications etc.
The impact crusher is mainly composed of hammerhead, main shaft, impact plate, rotor, frame and grate bar. Several rows of hanging hammers are arranged on the main shaft of the impact crusher.
Hammer crusher is divided into single rotor and double rotor. The main body is composed of box, rotor, hammer head, impact lining plate, sieve plate, etc. it can directly crush the material with the maximum particle size of 600-1800 mm to 25mm or below.
|
|
| Structure of Impact Crusher | Structure of Hammer Crusher |
The impact crusher has a large crushing chamber, which makes the material have a large space of activity and makes full use of the impact effect.
In contrast, the crushing chamber of hammer crusher is smaller, the impact effect cannot be fully exerted, and the impact crusher is of multi chamber crushing structure, so the crushing is more sufficient.
The plate hammer and rotor of the impact crusher are rigidly connected. The inertia of the whole rotor is used to impact the material (free crushing, impact crushing, milling crushing), so that materials can not only be crushed but also obtain a larger speed and kinetic energy. The plate hammer is used to smash the input material from the bottom to up and throw it onto the upper impact plate.
|
|
| Hammer Head of the Hammer crusher | The plate hammer of The Impact Crusher |
The wear of impact crusher plate hammer often occurs on the side that facing the materials, and its metal utilization rate can be as high as 45% – 48%. When crushing limestone, the plate hammer of impact crusher is not seriously worn, but when crushing granite (with high hardness, it can be broken by cone crusher), the plate hammer needs to be replaced constantly.
The hammer head of hammer crusher is in a suspended state, and the wear occurs at the top, front, back and side. Compared with plate hammer, the hammer head is more seriously worn, the metal utilization rate of hammer head is about 35%, and the rotor may also be worn.
In addition, if the bottom sieve plate of hammer crusher is seriously worn, all the screens should be replaced, and the replacement of sieve plate is complex.
Hammer crusher controls the particle size of the material through the castor bar installed at the bottom.
The impact crusher has no sieve structure such as castor bar, and it controls the separation of particles by adjusting device.
Both of them are suitable for crushing medium and hard materials, but the impact crusher is mostly used as the secondary crushing equipment. While the hammer crusher is mostly used in the cement production line, as the limestone raw material crushing equipment, or as the primary crushing equipment in the sand aggregate plant.
The compressive strength of materials suitable for hammer crusher is within 200MPa, such as coal gangue and limestone, while the compressive strength of materials suitable for impact crusher is within 350Mpa, such as gypsum, coal gangue, limestone, river pebble, sandstone, quartzite, etc. the application scope of impact crusher is wider.
