Rod Mill For Ore

Introduction of Rod Mill for Ore

Rod mill for ore is often used in gravity or magnetic separation plants of tungsten tin ore and other rare metal ores in order to prevent the harm caused by over-grinding. When handling soft or not too hard ores (especially those with large viscosity), the configuration is simple and the cost is lower than that closed configuration of the short head cone crusher and screen, and the dust removal of the crushing workshop can be simplified.

Types of Rod Mill for Ore

There are two types of rod mill for ore: dry type and wet type. Users can choose according to their actual situation. For processing quartz sand, dolomite, monazite, and other products, a magnetic separator can be used to remove iron after the rod mill for ore.

Performance of Rod Mill for Ore

The particle size characteristics of the rod mill for ore products are related to the grinding conditions of ore. When the rod strikes the ore, the coarse particles are first crushed and then the smaller ones are ground, thus reducing the risk of over crushing. When the rod rotates and rises along with the lining plate, coarse particles are sandwiched between them, which makes the fine particles pass through the cracks of the rod, which is also conducive to crushing the coarse particles and concentrating the coarse particles at the place where the grinding medium strikes. Therefore, the product of the rod mill for ore is more uniform and the over-grinding is lighter.