The sand-making equipment can make all kinds of rocks, gravel, and river pebbles into construction sand with various particle sizes. The produced sand has uniform density, high compressive strength, reliable performance, and easy operation. Recently, some of our customers reported that the production capacity of sand making equipment function could not reach the expected results. In fact, there are many reasons that affect the production capacity of the sand-making machinery. Today I will take you to learn more about it.
1. The humidity of the material
When the material humidity is too high, it is easy to adhere to the inner wall of the equipment. If these wet materials are not cleaned up in time, it will not only block the water inlet and outlet but also affect the work efficiency of the sand-making machine. If our material has high humidity, we can reduce the moisture in the material by drying, and then put it into the sand-making equipment.
2. Material hardness
If the material is too hard, the production capacity of the sandstone equipment will be reduced, and the vulnerable parts of the equipment will be easily damaged. For example, materials such as river pebbles and pebbles can be used with sand-making equipment. There are many types of sand production, and we can choose the appropriate equipment according to the nature of the material.
3. Finished product size
If we have higher requirements on the fineness of the sand-making machine, the longer the sand-making time, the lower the production capacity. If the particle size requirements of the finished product are high, we can consider adding the same sand-making equipment or combining it with fine crushers, rod mills, and other equipment for crushing to improve production efficiency and increase production capacity.
4. Equipment quality
Sand-making equipment produced by different manufacturers has different quality and production capacities. The new VSI sand making machine produced by Nile Machinery uses imported wear-resistant and high-temperature materials to make core components with long service life; it adopts a deep cavity rotor structure to increase the material passing rate by more than 20%; The impact block of the sand making machine increases the anti-friction layer, and the service life of the wearing parts is long.
5. Equipment maintenance
The quality of the sand maker machine not only depends on its own performance configuration but also good maintenance in the later period is also the key. Therefore, we should regularly overhaul and maintain the sand-making equipment, and carefully clean up the materials to be crushed. It is strictly forbidden to mix copper, iron, lead, and other metal parts and large stones and other sundries into the equipment. After working every day, check whether the parts of each component are loose and the degree of wear of the wearing parts, so as to avoid accidents and affect work efficiency.
Good sand-making equipment needs our joint maintenance, so as to make the sand maker machine have higher working efficiency and longer service life. The Nile Machinery has professional mechanics, if you have any questions about your equipment, you can consult us for free.
