High-efficiency Fine Stone Crusher

Product introduction:

The high-efficiency fine stone crushing machine is widely used in the production of refractory materials, such as cement, quartz sand, slag powder, granite, basalt, limestone, river pebble, cement clinker, quartz stone, iron ore, gold ore, concrete aggregate, asphalt aggregate, etc. It is a kind of energy-saving and high-efficiency crushing and sand-making equipment for the fine and medium crushing of hard and brittle materials, which saves 50% more energy than traditional fine crushers.

Features of high-efficiency fine rock crusher for sale:

1. High crushing efficiency, with functions of fine crushing and coarse grinding

2. The ability to pass non-crushed materials is strong, and it is less affected by the moisture content of the materials.

3. The product crushed by the fine grinding crusher has a good grain shape, cubic shape, and few needle-like materials. It is suitable for aggregate shaping and artificial sand making.

4. Low working noise and low dust pollution

5. On the basis of the old fine crusher, a counterweight wheel is added, which not only saves electric energy but also improves production efficiency.

The structure of the high-efficiency fine stone crusher:

The high-efficiency fine stone crusher is mainly composed of a counterattack plate device, a sidelining plate, a counterattack plate, a front lining plate device, a sieve plate device, and upper and lower shells.

Precautions:

1. Before starting the high-efficiency fine crusher machinery, the operator must carefully check all the components and whether the bolts are in good condition.

2. The hammerhead is an important part of the fine crusher equipment. Due to its long-term beating effect, it is one of the most easily worn parts. Pay attention to inspection and replacement during daily maintenance.

3. The operator should regularly check the lubrication status of each lubrication point of the equipment and pay attention to daily maintenance. Change the lubricating oil when the machine has been working for more than 900 hours or 6 months.

4. The operator should repair the wear between the crushing plate and the hammerhead in time and adjust the distance between the crushing plate and the hammerhead before use.