Pyb900 Cone Crusher Parts

Product description of Pyb900 Cone Crusher Parts

1.It has a compact structure, high production efficiency by applying the bowl-shaped bearing for high-precision reservations.

2.Centralized lubricating and dust-proof.The spring security device can protect the equipment from being damaged.

3.Low wear part consumption.

Maintenanceof Pyb900 Cone Crusher Parts

1.There must be a de-ironing device in Pyb900 cone crusher parts to prevent the crushing cavity from passing through the iron. Otherwise, the iron is frequently over-exposed and may cause fracture of the shaft.

2.Do not produce at full capacity, otherwise, the product size will be too thick.

3.The Pyb900 cone crushershould be evenly fed during the work. If the feeding is uneven, the production capacity will decrease and the product size will be too large, which makes the spring action frequent, the drum bearing pressure increased, and the power consumption increased.

4.The oil should be changed frequently, and it should not be too dirty. Too dirty will accelerate the wear of gears, bowl tiles, and bushing

5.The installation of the drive belt should not be too tight, otherwise, the transmission shaft will not rotate properly even break. It should not be too loose, otherwise, it will cause the crusher to suffocate.

6.The feedof Pyb900 cone crusher can not be too wet, sticky,and large. The crushing ratio in the production line should be reasonable so that the crusher efficiency can be achieved.

7.The spring pressure of the Pyb900 cone crushershould not be too tight. If the pressure is too high, shaft will be broken.Several wear-resistant plates of steel can be included in the casting formulation to extend the service life of the Pyb900 Cone Crusher Parts.

8.Several mantle/bowl profile configurations will decrease wear while increasing output and final quality of Pyb900 Cone crusher parts.