Symons Cone Crusher Capacity

How to increase theSymons Cone Crusher Capacity

1. Keep the parameters of tight edge discharge port unchanged

To stabilize the output, quality, and production line load of sand and gravel products, the first thing to ensure is that the parameters of the discharge mouth of the Symons cone crusher tight edge remain unchanged, otherwise it is easy to cause the unexpected increase of product particle size and affect the whole production line system and final output.

2. Try to keep "full cavity" operation

If a Symons cone crusher is "hungry" and "full" due to unstable feeding and other factors, its product grain shape and product rate will also fluctuate. The Symons cone crusher with half cavity running is not ideal in terms of gradation and needle sheet shape of the finished product. So sand and stone manufacturers should try their best to ensure that the Symons cone crusher runs in the full cavity, but not overfill the feed to obtain better throughput and grain shape.

3. Don't feed too little

Too little raw materials will not reduce the burden of Symons cone crusher. On the contrary, it will not only damage the Symons cone crusher capacity and produce poor grain shape, but also have an adverse effect on the bearings of the Symons cone crusher.

Outstanding advantagesof Symons Cone Crusher

1.The Symons cone crusher adopts a unique dust-proof sealing structure, which has a reliable sealing effect and effectively prolongs the replacement cycle of lubricating oil and the service life of parts.

2.Symons cone crusher supportsa large crushing ratio. The distance between the crushing wall and the wall of the rolling mortar in each stroke is large, which not only allows more materials to enter the crushing cavity but also forms a larger discharge volume, which accelerates the speed of materials passing through the crushing cavity.

3.High quality finished grain shape. The Symons cone crusher adopts the special crushing cavity shape and lamination crushing principle to produce the crushing effect between the particles so that the proportion of cube in the finished product is significantly increased, the number of needle and flake stones is reduced, and the grain size is more evenly.

4.Compared with other models, the crushing arm of Symons cone crusher is long, the stroke is large, and the crushing force is large, which can crush the materials in the crushing cavity more effectively, and crush more materials in each stroke.