Small And Portable Gold Wash Plant

Common Usage Problems

1.The conveyor belt does not discharge when idling or not smoothly running. This problem is caused by the long-term use of the sand screener, which leads to the looseness and slipping of the B-type V-belt at the discharge outlet and insufficient force transmission, which can be solved by adjusting the B-type V-belt.

2.It is easy to paste the screen after the rain. Generally, a Small and portable gold wash plant will have the phenomenon of sieve paste after the rain. Nile Machinery trommel plant is equipped with a sieve whipping structure to force the sand paste on the screen down, and the effect is very good.

3.After the mall and portable gold wash plant is used for a period of time, be sure to check whether the oil is sufficient, otherwise, the reducer will be burnt out.

Operation Preparation

In order to operate the small and portable gold wash plant better, the following points should be prepared before the equipment is used.

1.The screening machine should be started with no load, that is, no material can be started in the drum, otherwise the load of the equipment will increase and the parts of the equipment will be damaged in serious cases. Pay attention to check the firmness of each fastener. The surrounding screen body can not prevent the drum operation of the drum.

2.Check the lubrication of each bearing, rotate the screen tube by hand, check whether there is jamming or friction, and adjust the bolts properly.

3. Check whether the screen is damaged or blocked. If there is a blockage that affects the normal leakage of sand, the small and portable gold wash plant should be repaired or replaced in time.