The wet pan mill is called a gold refining machine, which is new grinding mill equipment with a small investment, high yield, low production cost, and good benefits and is suitable for the selection of iron ore, molybdenum ore, lead ore, zinc ore, antimony ore and so on.
Advantages of gold wet pan mill
1. The grinding wheels and grinding base are made of high manganese steel, which is very hard and rigid. So its service life will be doubled.
2. Adopts 6 phases motor, which can reduce energy consumption.
3. Easy installation and maintenance, small investment, high yield, quick and low-cost production.
The Operation and Maintenance
1) The raw material should be put into the grinding machine after the machine running normally.
2) This machine is not allowed to state the material in the machine. If the machine is stopped because of stoppage, the residual material in the machine should be cleared. Then start the machine again.
3) The material should be put into the machine uniformity, not sometimes much sometimes less. It's better to use feeding equipment.
4) The bearing part should add butter regularly.
5) Every bolt should be checked to avoid flexibility.
6) The bearing should be changed in time if it is damaged to avoid damage to other parts.
7) While the machine is running formally, you should check if there is abnormal sound in the reducer box and or bearing part, if there is a too high temperature if there is too big motor current, and so on. If it happened, you should stop the machine to remedy the trouble.
8) The motor V-belt should be removed while examine and repair the machine for your safe.
